Access Point Cisco Wireless 9171I Wi-Fi 7 - CW9171I-RTG
Nuevo - Caja sellada
Access Point Cisco Wireless 9171I Wi-Fi 7 - CW9171I-RTG
Catalyst 9100
CW9171I-RTG
Cisco Wireless 9171I Wi-Fi 7 (2 radio, 3 band, 2x2 Global)
|
Product |
Specifications |
|||||||
|
Part numbers |
Cisco Wireless 9171 Access Points: Internal antennas
● CW9171I model: Indoor access point with omnidirectional antennas
|
|||||||
|
Software |
Cisco IOS XE Software Release 17.18.2 or later Cisco Meraki MR32.1.5 or later |
|||||||
|
Supported wireless LAN controllers |
● Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual)
● Cisco Catalyst 9000 switches with Embedded Wireless Controller in SD-Access mode.
|
|||||||
|
802.11be |
● 2x2 with two spatial streams (2.4 GHz, 5 GHz/6 GHz)
● 4096 quadrature amplitude modulation (QAM)
● Multilink operation
● Preamble puncturing
● Uplink/downlink OFDMA
● Target Wake Time (TWT)
● BSS coloring
● Maximal Ratio Combining (MRC)
● 20-, 40-, 80-, 160-, and 320-MHz channels (6 GHz)
● 20-, 40-, 80-, and 160-MHz channels (5 GHz)
● 20-MHz channels (2.4 GHz)
● PHY data rates up to 6.0 Gbps (2x2 320 MHz on 6 GHz or 2x2 160 MHz on 5 GHz, and 2x2 20 MHz on 2.4 GHz)
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support
● Wi-Fi Protected Access 3 (WPA3) support
|
|||||||
|
802.11ax |
● 2x2 with two spatial streams (2.4 GHz, 5 GHz/6 GHz)
● Uplink/downlink OFDMA
● 1024 QAM
● TWT
● BSS coloring
● MRC
● 802.11ax beamforming
● 20-, 40-, 80-, and 160-MHz channels (5 and 6 GHz)
● 20-MHz channels (2.4 GHz)
● PHY data rates up to 2.7 Gbps (2x2 20 MHz on 2.4 GHz, 2x2 160 MHz on 5 GHz, or 2x2 160 MHz on 6 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA2/WPA3 support
|
|||||||
|
802.11ac |
● 2x2 + 2x2 with 2 spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80-, and 160-MHz channels
● PHY data rates up to 1.7 Gbps (2x2 160 MHz on 5 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA2/WPA3 support
|
|||||||
|
Integrated antenna |
● 2.4 GHz: Peak gain 4dBi, internal antenna, omnidirectional in azimuth
● 5 GHz: Peak gain 5.5dBi, internal antenna, omnidirectional in azimuth
● 6 GHz: Peak gain 6dBi, internal antenna, omnidirectional in azimuth
● IoT: Peak gain 2dBi, internal antenna, omnidirectional in azimuth
|
|||||||
|
802.11n version 2.0 |
● 2x2 MIMO with two spatial streams
● MRC
● 802.11n and 802.11a/g beamforming
● 20- and 40-MHz channels
● PHY data rates up to 440 Mbps (2x2 40 MHz with 5 GHz and 2x2 20 MHz with 2.4 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
|
|||||||
|
Interfaces |
● 1x 100M/1000M/2.5G Multigigabit Ethernet (RJ-45) uplink
● Management console port (RJ-45) with default speed of 115200 bps
● USB 2.0 at 4.5W
● DC power jack, 54V
|
|||||||
|
Incorporated radios |
● Wi-Fi 7 802.11be on all three radios
● 2.4 GHz + 5 GHz or 6 GHz (all 2x2:2)
● Dedicated scan/aux radio and IoT (BLE 6) radio
|
|||||||
|
Indicators |
Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
|||||||
|
Dimensions (WxLxH) |
CW9171I model (without mounting brackets):
● 7.8 x 7.8 x 2.1 in. (20 x 20 x 5.3 cm)
|
|||||||
|
Weight |
● 1.9 lb (874g)
|
|||||||
|
Mounting brackets |
● AIR-AP-BRACKET-1 or AIR-AP-BRACKET-2
|
|||||||
|
Input power requirements |
Power source |
2.4-GHz radio |
5-GHz/6-GHz radio |
USB |
Link speed |
|||
|
802.3at (PoE+) |
2x2 |
2x2 |
Yes |
2.5G |
||||
|
802.3af (PoE) |
1x1 |
- |
- |
1G |
||||
|
Power source |
Idle |
Typical |
||||||
|
Dual radio 802.3at (PoE+) |
9.8W ± 2W |
11.4W ± 4W |
||||||
|
Note: Actual power consumption may vary depending on access point usage. Typical power consumption assumes the access point is passing traffic* during typical business hours and is idle during off-business hours. Business hours are assumed to be 11 hours a day, 6 days a week. * Test conditions: Dual radio 802.3at: The 5-GHz band operating at 160 MHz (2x2) passing 200 Mbps per band of download traffic and the 2.4-GHz band operating at 20 MHz (2x2) passing 50 Mbps of download traffic; USB disabled; 2.5G Ethernet port; ambient temperature 25˚C (77°F). |
||||||||
|
Environmental |
● Nonoperating (storage) temperature: -40˚ to 158˚F (-40˚ to 70˚C)
● Non-operating (storage) altitude test: 0 to 550 mbar (at approx. 4863m, 16,000 ft)
● Operating temperature: 32˚ to 122˚F (0˚ to 50˚C)
● Radio operation derated for 104˚F to 122˚F (40˚C to 50˚C)
● Operating humidity: 0% to 95% (noncondensing)
● Operating altitude test: 50˚C (122˚F) at 0 to 4205m (13,800 ft)
|
|||||||
|
Available transmit power settings |
2.4 GHz:
● 20 dBm (100 mW)
● -10 dBm (0.1 mW)
5 GHz:
● 20 dBm (100 mW)
● -10 dBm (0.1 mW)
6 GHz:
● 20 dBm (100 mW)
● -10 dBm (0.1 mW)
Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate in 6 GHz for that country. |
|||||||
|
Compliance standards |
● Safety:
◦ IEC 60950-1 / IEC 62368-1 Ed.3 (with Ed.2 Deviation annex)
◦ EN 60950-1 / EN 62368-1 Ed.3 (with Ed.2 Deviation annex)
◦ UL 60950-1 / UL62368-1 3rd (with Ed.2 Deviation annex)
◦ CAN/CSA-C22.2 No. 60950-1 / CAN/CSA-C22.2 No. 62368-1 3rd (with Ed.2 Deviation annex)
◦ AS/NZS60950.1 / AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex)
◦ UL 2043
◦ Class III equipment
● Emissions:
◦ CISPR 32 (rev. 2015) +AMD1:2019
◦ EN 55032:2015/A11:2020
◦ EN IEC 61000-3-2:2019/A1:2021
◦ EN 61000-3-3:2013+A1:2019
◦ AS/NZS CISPR32: 2015+AMD1:2020
◦ 47 CFR FCC Part 15B
◦ ICES-003 (Issue 7, Class B)
◦ VCCI-CISPR 32:2016
◦ CNS 13438:2006 (95)
◦ KS C 9832:2019
◦ QCVN 118:2018/BTTTT
● Immunity:
◦ EN 55035:2017+A11:2020
◦ KS C 9835:2019
● Emissions and immunity:
◦ EN 301 489-1 V2.2.3 (2019-11)
◦ EN 301 489-17 V3.2.4 (2020-09)
◦ QCVN (18:2014)
◦ QCVN 112:2017/BTTTT
◦ KS X 3124:2020
◦ KS X 3126:2020
◦ EN 61000-6-1:2019
◦ EN 60601-1-2:2015+A1:2021
|
● Radio:
◦ EN 300 328 (v2.2.2)
◦ EN 301 893 (v2.1.1)
◦ EN 303 687 (v1.1.1)
◦ AS/NZS 4268 (rev. 2017)
◦ 47 CFR FCC Part 15C, 15.247, 15.407
◦ RSP-100
◦ RSS-GEN
◦ RSS-247
◦ LP0002 (109)
◦ Japan Std. 66, and Std. 71
● RF safety:
◦ EN 50385:2017
◦ AS/NZS 2772 (rev. 2016)
◦ 47 CFR Part 2.1091
◦ RSS-102
◦ IEEE standards:
◦ IEEE 802.3
◦ IEEE 802.3ab
◦ IEEE 802.3af/at
◦ IEEE 802.11a/b/g/n/ac/ax/be
◦ IEEE 802.11h, 802.11d
● Security:
◦ 802.11i (WPA2, WPA3)
◦ 802.1x/802.1x - SHA256
◦ Enhanced Open/OWE
◦ Advanced Encryption Standard (AES) - GCMP128, GCMP256 and CCMP256
● Extensible Authentication Protocol (EAP) types:
◦ EAP-Transport Layer Security (TLS)
◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2
◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2
◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
◦ PEAP v1 or EAP-Generic Token Card (GTC)
◦ EAP-Subscriber Identity Module (SIM)
|
||||||
|
Certifications |
● Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
● Bluetooth SIG: Bluetooth Low Energy
|
|||||||
*Nota: si bien este equipo puede trabajar en 2.4, 5 y 6 GHz, tiene solamente 2 radios y se debe elegir si trabajar con 5 o con 6 GHz.
Si necesitas saber dónde y cuántos access points necesitas instalar, en Empresa Conectada te ayudamos con el modelamiento predictivo Wi-Fi en 3D. Si necesitas validar tu red o realizar troubleshooting, realizamos site survey.
Para más información, visita: https://empresaconectada.tech/soluciones/hamina-wireless